Chapter 6,9, 10

In: Computers and Technology

Submitted By jboy28
Words 376
Pages 2
structure cabling 8/21/14
Chapter 6 p205 master it 1. Which of the following supplies enables the reduction of friction on the cables while being pulled? 1. Cabling pulling tool 2. Cable pulley 3. Wire-pulling lubricant 4. Gropher pole
Wire-pulling lubricant is enable the most reduction of friction on the cables
Chapter 9 p290 1. What are the main aspects that must be addressed when designing and installing wall plates? Manufacturer system, wall plate location, wall plate mounting system, and whether to use a fixed design or a modular plate. 2. Which TIA standards should you refer for ensuring proper design and installation of wall plates? You should refer to ANSI/TIA-570-B for residential and ANSI/TIA568-c.1 for commercial 3. Which type of wall plate would you provide you with the most flexibility and why? Modular wall plates will provide you with the greatest flexibility because the designs have individual components that can be installed in varying options
Chapter 10 p315 1. What is the most common modular jack designation for IP/Ethernet-based systems(for example, 100base-tTX)? What are your wiring pattern options? They can be wired with either A or B standards. The US government however recommends the A standard Which of these wiring patterns is necessary for government installations? The most common modular jack designation for Ethernet application is the 8-pin Rj-45

2. What is the common coaxial connector type to support security-camera service? F-Series connector SFF

A. What class of optical-fiber connector would you use to increase the density of fiber connections? The LC, VF-45 and the MT-RJ increase the support of density in fiber optic cable B. Which of these types would you use for single fiber connections? C. Which one of these typed would you use for 12 or more fiber connections ion one…...

Similar Documents

Building Management Chapter 10

...Alejandro Paredes Management for Organizations Chapter 10 Building Management Skills Think of an organization with which you are familiar or perhaps one in which you have worked, such as a store, restaurant, office, church, or school. Then answer the following questions. 1. Which contingencies are most important in explaining how the organization is organized? Do you think it is organized in the right way? A large university will be used as an example of an organization. The environment is important in explaining why a university is usually operated under a formal structure. Historically, universities have served the purpose of providing higher education, with adequate faculty and support staff. The environment was not subject to a high level of uncertainty, and resources were readily available. Most universities adopted the same strategy, perhaps differentiating some programs, but most were comparable in services and courses offered. Technology has emerged as a new standard, though computers are becoming increasingly prevalent in all aspects of teaching and administration. Human resources is less of a factor because the range is typically great, from professors, to custodial staff, to administrative staff. This formal, functional structure may not be the most appropriate for universities that hope to succeed in the coming years. Students are requiring more from schools, funding is scarce, and many schools need to learn to do more with less. A more flexible......

Words: 1690 - Pages: 7

Chapter 10

...Chapter 10: Re-expressing Data: Get it Straight Creating a model is a mechanical process; knowing when it is appropriate to use it is a thinking/analysis process. A useful model is the ultimate goal. Linear Models have tools that are relatively simple to understand and interpret: slope, yintercept. We can verify that a linear model is appropriate by checking the conditions and looking at the residual plot. Curved Models can be fit, but relatively speaking are more difficult to calculate. First Approach: Make sure that a re-expression can be meaningful. • Once we re-express, decide if the model is appropriate o Create the model o Plot the residuals o If there is still a curve, build another model o When the model has random, scattered residuals then we interpret using the model • Scatter plot shows a mixture of “signal” and “noise” o Signal is the underlying association between the variables o Noise is the random variation unaccounted for by the association o Example: in a scatter plot of height and weight, generally tall people weigh more; however, not all 6 ft tall people weigh the same—that variation is the noise. We want a regression model that describes the signal (the underlying relationship between ht and wt) Residual plot shows us the variation that is not explained by the model If the plot is random (just noise) then we have captured the whole signal If a curve remains in the residual plot, then we missed some of the signal meaning we need to look for a better......

Words: 1098 - Pages: 5

Chapter 10

... Chapter 10 Product Liability I. Definition of Product Liability Manufacturers and anyone in the chain of product distribution can be legally liable for defective products that cause injury to the purchaser, a user or bystander, or their property. Most states have adopted strict product liability, whereby an injured person may recover damages without showing that the manufacturer was negligent or otherwise at fault without a contractual relationship. II. Theories of Recovery The primary theories on which a product liability claim can be brought are breach of warranty, negligence, and strict liability. A. Breach of Warranty In a warranty action, the question is whether the quality, characteristics, and safety of the product were consistent with the implied or express representations made by the seller. 1. UCC Warranties  may be either express or implied for merchantability or fitness for a particular purchase, as set forth in Chapter 8. 2. Privity of Contract  Breach-of-warranty is based on contract law. Generally, an injured person to recover for a breach of warranty, he must be in a contractual relationship (privity) with the seller (a consumer or buyer of the product) and prevents recovery from bystanders not in privity with the seller. B. Negligence To prove negligence in a product liability case, plaintiff must show defendant did not use reasonable care in designing or manufacturing its product or in providing adequate......

Words: 4228 - Pages: 17

Chapter 10

...issue is short-term and mainly due to a lack of rooms. Hotels look at this opportunity as the best possible way to extract maximum prices. In the future, more development of hotel rooms will ensure lower tariffs and more supply. If one has to compare the Indian hotel rates with their South East Asian counterparts, Indian hotels are 50 per cent higher.” Rohit Kohli, director - operations, Creative Travels “India as a destination has indeed out-priced itself and in comparison to its competitors it has lost the competitive edge. What the inbound industry is witnessing is an increase in pricing without hotels actually improving the quality and standards. In fact, to cite an example, this summer season has witnessed a reduced growth of about 10 per cent as compared to last year’s summer season. One needs to realise that the hotel component forms quite a major portion of a travel or tour package. And considering that these hotel prices fluctuate at about 100-150 per cent, it certainly leaves the market in a very dicey position.” Ajay Bali, CEO, TQ3 India “There is an approach tour operators can use to an extent to hedge their risks. Negotiated rates are one way that tour operators can insulate themselves against a spike in room rates and even shortage of rooms. However, this approach of pre-booking gives both the tour operator and his client little or no room for manoeuvre to itenary or number of days spent in India. For instance, tourists will be reluctant to make impulse......

Words: 912 - Pages: 4

Ac 410 - Chapter 10

...CHAPTER 10 Acquisition and Disposition of Property, Plant, and Equipment ASSIGNMENT CLASSIFICATION TABLE (BY TOPIC) Topics 1. Valuation and classification of land, buildings, and equipment. 2. Self-constructed assets, capitalization of overhead. 3. Capitalization of interest. 4. Exchanges of assets Questions 1, 2, 3, 4, 6, 7, 12, 13, 18 5, 8, 20, 21 7, 9, 10, 13, 18 12, 16, 17 2, 3, 4 8, 9, 10, 11, 12 6, 7 Brief Exercises 1 Exercises 1, 2, 3, 4, 5, 13 4, 6, 12 4, 5, 7, 8, 9, 10, 16 3, 11, 16, 17, 18, 19, 20 3, 6, 11, 12, 13, 14, 15, 16 21, 22, 23 3 24, 25 4 1 1, 5, 6, 7 4, 8, 9, 10, 11 1, 11 Problems 1, 2, 3, 5 Concepts for Analysis 1, 6, 7 2 3, 4 5 5. Lump-sum purchases, issuance of stock, deferred payment contracts. 6. Costs subsequent to acquisition. 7. Alternative valuations. 8. Disposition of assets. 12, 14, 15 16, 18, 19, 22 23 24 13 5 14, 15 1 10-1 ASSIGNMENT CLASSIFICATION TABLE (BY LEARNING OBJECTIVE) Learning Objectives 1. 2. 3. 4. 5. Describe property, plant, and equipment. Identify the costs to include in initial valuation of property, plant, and equipment. Describe the accounting problems associated with self-constructed assets. Describe the accounting problems associated with interest capitalization. Understand the accounting issues related to acquiring and valuing plant assets. Describe the accounting treatment for costs subsequent to acquisition. Describe the accounting treatment for the disposal of property, plant, and equipment.......

Words: 17284 - Pages: 70

Chapter 10

...Chapter 10 Property, Plant, and Equipment and Intangible Assets: Acquisition and Disposition AACSB assurance of learning standards in accounting and business education require documentation of outcomes assessment. Although schools, departments, and faculty may approach assessment and its documentation differently, one approach is to provide specific questions on exams that become the basis for assessment. To aid faculty in this endeavor, we have labeled each question, exercise, and problem in Intermediate Accounting, 7e, with the following AACSB learning skills: |Questions |AACSB Tags |Brief Exercises |AACSB Tags | |10–1 |Reflective thinking |10–13 |Analytic | |10–2 |Reflective thinking |10–14 |Analytic | |10–3 |Reflective thinking |10–15 |Analytic | |10–4 |Reflective thinking |10–16 |Analytic | |10–5 |Reflective thinking |Exercises cont. |AACSB Tags | |10–6 |Reflective thinking ...

Words: 13744 - Pages: 55

Operation Management Chapter 10

...CHAPTER 10 SUPPLY CHAIN MANAGEMENT Teaching Notes This chapter introduces the concept of supply chain, its management, performance measures and improvement approaches. As an extension of the systems point of view, the system dynamics inherent in the supply chain are illustrated and the coordination in the supply chain is emphasized. Five areas where measurement of supply chain performance should be made are discussed. The five areas are on-time delivery, quality, time (business cycle) total delivered cost and flexibility. Supply chain strategies including functional or innovative strategies are described with examples. The basic ways to improve supply chains by changing structure or infrastructure are illustrated. The chapter ends with a discussion of e-business, e-procurement, and virtual supply chains. In teaching the chapter, it is helpful to illustrate the systems interactions in a supply chain and show how supply chain performance can be measured and improved through the use of concrete examples. The references by Lee (1995, 2004), Schonberger (1996), Fisher (1997), Badoc (2001), and Baliga (2001) will be useful in preparing lectures. Answers to Questions 1. Supply chain management is planning, design and control of the flow of information and materials along the supply chain in order to meet customer requirements in an efficient manner, now and in the future. Demand management is managing the demand for goods or services along the......

Words: 1909 - Pages: 8

Chapter 9 & 10 Summary

...Ding Luo Chapter 9 & 10 Summary In chapter 9 we learned the 9 different formulas, for time value of money. 1. Future value of a single amount a. FV = PV X FVIF 2. Present value of a single amount b. PV = FV X PVIF c. This is to determine the present value of an amount to be received in the future. 3. Future value of an annuity d. FVA = A X FVIFA e. To determine the future value of a series of consecutive, equal payments (an annuity). 4. Present value of an annuity f. PVA= A X PVIFA 5. Annuity equaling a future value g. A = FVA ÷ FVIFA h. To determine the size of an annuity that will equal a future value. 6. Annuity equaling a present value i. A = PVA ÷ PVIFA j. Determines the size of annuity equal to a given present value. 7. Determine the yield on an investment k. PVIF = PV÷ FV (Yield – present value of a single amount) (Appendix B) l. PVIFA = PVA ÷ A (Yield- present value of an annuity) (Appendix D) m. To determine the interest rate that will equate an investment with future benefits 8. Less than annual compounding periods n. If the compounding period is more or less frequent than once a year. 9. Patterns of payment – deferred annuity o. PVA = A X PVIFA (Appendix D) p. PV = FV X PVIF (Appendix B) q. If an annuity begins in the future. For chapter 10, I learned valuation of financial assets: bonds, preferred stock......

Words: 322 - Pages: 2

Mis Chapter 10

...Chapter 10 – Assignment (written portion) Chris Marchionni Please read Chapter 10 carefully and complete this written assignment. <Chapter Questions> 1. What is the purpose of this chapter (Chapter 10)? To inform us on how business processes, Information systems, and applications are developed and understand how they relate and differ. Also, it explains how organizations use business process management and the activities associated with it. 2. What is a business process? A business process is a network of activities, repositories, roles, resources, and flows that interact to accomplish a business function. 3. What are activities? Activities are collections of related tasks that receive inputs and produce outputs. 4. What is a repository? A repository is a collection of something; an inventory is a physical repository and a database is a data repository. 5. In a business process, a role refers to collections of activities. 6. What is business process management (BPM)? BPM is a cyclical process for systematically creating, assessing, and altering business processes. 7. Please specify each step in the business process management cycle. Step 1: as-is model Step 2: create components Step 3: implementing new or changed process Step 4: create policy and procedures 8. What is an as-is model? It is a model of the existing business process. 9. The Object Management Group is a software-industry standards organization that created a standard set of...

Words: 852 - Pages: 4

Advance Accounting Chapter 10

...CHAPTER 10 SUGGESTED ANSWERS EXERCISES Exercise 10 - 1 |1. Assets, other than goodwill |550,000 | | | Goodwill |196,000 | | | Liabilities | |230,000 | | Ordinary Share Capital | |516,000 | | | |Co. A |Co. B |Co. C |Total | | |Net asset contribution |P 90,000 |P120,000 |P110,000 |P320,000 | | |Goodwill contribution | | | | | | | Average earnings |P 16,000 |P 20,000 |P 22,000 | | | | Normal earnings | 10,800 | 14,400 | 13,200 | | | | Excess earnings |P 5,200 |P 5,600 |P 8,800 | | | | Capitalization rate | 10% | ...

Words: 2470 - Pages: 10

Chapter 10

...Megan VanSickle Climate Change Collapse Summaries Chapter 10-Malthus in Africa: Rwanda’s Genocide Summary In Chapter 10 Jared Diamond is educating the readers in the instance of Rwanda’s collapse with the conditions of lack of farming land, hunger, war, poverty, lack of natural resources and more. These were caused by population pressure. Overpopulation is the primary cause which brings many problems along with it. Diamond begins the chapter by discussing and talking about his family’s stay in East Africa. He and his family saw overpopulated streets of poor people which sadly most of them were children. The children were on the side of the road begging. Diamond also discusses how population problems such as this with East Africa are sometimes pointed out as Malthusian theory. This is when population grows rapidly compared to food production increases. Diamond also discusses the Rwanda’s people that were controlled and influenced by Hutus, mostly farmers and Tutsis. Hutus and Tutsis did not like each other so Hutus army started killing Tutsis with weapons. Diamond later causes many examples such as overpopulation in Kanama. This caused population consuming below the average daily required calories. This educated readers about the different regions that are coming to be thee victims of population pressure. At the end of chapter 10, Diamond thinks that overpopulation had great impact on the Rwandan genocide. Diamond uses three counterarguments in order to prove his point...

Words: 272 - Pages: 2

Business Law Chapter 10

...Chapter 10 1. (1) h (2) f (3) j (4) a (5)g (6) i (7) e (8) d (9) b (10) c 2. personal property used in business’ shall mean tangible goods and chattels use or held for use by any business conducted for profit but doesn’t include goods and chattels affixed to real property as to become part thereof and not to be removable without the material’s injury. If these cranes come within the exception quoted, then they must be taxed as real estate. If they are found to not come within this exception, they are properly taxable as personal property used in business under the Business Personal Property Tax Act. 3. A fixture is defined as personal property that has become attached or annexed to real estate; a fixture generally is treated as part of real estate. There are certain things considered when determining whether or not the item will be considered as a fixture. First, it will need to be determined whether the fixture is included in the real estate for tax purposes. Second, it would need to be determined if the sale of the real estate will include the item of property. Third, it will need to be determined whether the item is covered by the mortgage and fourth, if the item belongs to the landowner, not the tenant that could be terminated of a lease. Based on information above, although the cable was annexed to the telephone poles, it was based on a lease, it did not belong to the landlord owner, therefore it could not qualify as a fixture. In addition, the cable......

Words: 309 - Pages: 2

Chapters 10 Linux

...Jose Alberto Salazar OECS-205-D02 Homework 2 Answer Exercises 1 and 3 on page 499 (End of chapter 10) 1.- How does single-user mode differ from multiuser mode? When a system is in single-user mode, you can log in only at the console. Not all of the file systems are mounted,and many daemons are not running. With the system in multiuser mode you can login at any terminal or workstation that is set up for login, most or all of the filesystems are mounted, and all of the daemons that your system is set up to run arerunning. 3.-What do the letters of the su command stand for? (Hint: It is not Superuser.) What canyou do with su besides give yourself root privileges? How would you log in as Zach ifyou did not know his password but knew the root password? How would you establishthe same environment that Zach has when he first logs in? The letters su stand forsubstitute user. With su you can use the su utility can spawn a shell or execute aprogram with th identity and privileges of a specified user, including root.Byfollowing the su on the command line with Zach’s name as long as you are working with root privileges will allow you to log on as Zach.By using the su commandutility and the root password will alow you to log on as Zach with the sameenvironment Answer Exercises 1,3,5,6,7 on page 530 (End of chapter 11) 1.- What is the function of the /etc/hosts file? Which services can you use in place of or to supplement the hosts file? ...

Words: 536 - Pages: 3

Read on Chapter 9 and 10

...Read on Chapter 9 and 10 Click Link Below To Buy: Business W-3120 Read Chapter 9 and 10,answer the qustions.What do you think is the toughest question to get in an interview? How would you answer that question? Detailed responses. Please write more detailes and more words. Chapter 9 Understanding the Report Process and Research Methods Chapter 9 Understanding the Report Process and Research Methods Learning Objectives 1. 2. 3. 4. 5. Identify the characteristics of a report and the various classifications of business reports. Apply steps in the problem-solving process and methods for solving a problem. Use appropriate printed, electronic, and primary sources of information. Demonstrate appropriate methods of collecting, organizing, and referencing information. Explain techniques for the logical analysis and interpretation of data. Chapter Overview After having studied informal communications including letters, memos, and electronic communication, students seem to understand the objective and formal nature of reports simply because of the contrast. Chapter 9 follows a sequence that begins with report characteristics and then covers the four steps in problem solving. Methods of research are presented, with considerable attention given to sampling and designing survey instruments used in normative surveys. Information is included for locating both printed and electronic sources of information. Chapter......

Words: 425 - Pages: 2

Pwc Chapter 10

...of the various sections in each chapter. The titles of each section are intentionally descriptive to enable users to easily find their particular topic. Index: An index indicating the specific sections where key words are used can be helpful to find a particular topic. • Executive Takeaway Executive Takeaway can be found at the beginning of each chapter in this guide. The Executive Takeaway provides a high-level overview of the key points addressed in detail within each chapter. Wording Differences between U.S. GAAP and IFRS Standards When information in the text of each chapter appears in [ ], the bracketed text identifies wording in IFRS that is different from the wording in the U.S. GAAP codification. References to U.S. GAAP and IFRS Excerpts from specific paragraphs within the codification in U.S. GAAP and a standard in IFRS appear in the regular text of the guide. These excerpts are highlighted in blue within the text. References to specific paragraphs within the codification in U.S. GAAP and a standard in IFRS appear in brackets and indicate where the guide is quoting, directly or indirectly, from a particular standard. References in brackets detail the codification section or particular standard and paragraph within that standard that is being referenced. For example, a reference to paragraph 2 of IFRS 6 is displayed as [IFRS 6.2]. References to Other Chapters and Sections in this Guide General and specific references to other chapters are provided within this......

Words: 348139 - Pages: 1393

Mon premier jardin en permaculture | 足の靴下 | Reverie 9.2