Inicio Elio Engineering

In: Miscellaneous

Submitted By gaby
Words 1968
Pages 8
Case Questions ERP Northern Digital Inc.
1. For a company so small, why is a better ERP SCM applications?
A very fpequeña company that could be considered, you must always think about growing and being a leader. It's easier for an organization to adopt an SCM system when we already have the ERP system, ie use the ERP system as a framework for the insertion of a Supply Chain Management System (Supply Chain Management). So is not it better, I think that could be considered as a start.
This integration would enable a reduction in expenses and a profit on customer service, for a SCM includes the management of transport and storage of raw materials, inventory and delivery of goods and / or services. At the same time, the proper administration of the Supply Chain aims to consider and prevent possible events that can be reached in the process bring about a product or service to a customer. SCM systems allow a convenient way to manage the various steps involved in this process, covering the performance of traditional ERP and adding new features. Identify supply chain segments that supports ERP (be specific).
ERP systems usually begin with the creation of an order and shipment, including transport, delivery and billing process. "It's a very direct chain logistics to the sales stage, the functionality might include some aspects of planning and demand planning. You can track customer demand and generate a forecast. Based on these data is possible to optimize the supply chain delivery. " (Kiske)
Typical modules of a management suite of supply chain for an ERP system include:
• Demand forecasting and planning.
• Network planning supply chain to meet demand with supply.
• Production planning that reflects the demand.
• Detailed program that directs the production to demand.
• Event Management to collect and analyze distributed data sources
• Alert monitors…...

Similar Documents

Engineering

...Civil Engineering has been an aspect of life since the beginnings of human existence. The earliest practices of Civil engineering may have commenced between 4000 and 2000 BC in Ancient Egypt and Mesopotamia (Ancient Iraq) when humans started to abandon a nomadic existence, thus causing a need for the construction of shelter. During this time, transportation became increasingly important leading to the development of the wheel and sailing. Until modern times there was no clear distinction between civil engineering and architecture, and the term engineer and architect were mainly geographical variations referring to the same person, often used interchangeably. The construction of Pyramids in Egypt (circa 2700-2500 BC) might be considered the first instances of large structure constructions. In the 18th century, the term civil engineering was coined to incorporate all things civilian as opposed to military engineering. The first engineering school, The National School of Bridges and Highways, France, was opened in 1747. The first self-proclaimed civil engineer was John Smeaton who constructed the Eddystone Lighthouse. In 1771, Smeaton and some of his colleagues formed the Smeatonian Society of Civil Engineers, a group of leaders of the profession who met informally over dinner. Though there was evidence of some technical meetings, it was little more than a social society. In 1818, world’s first engineering society, the Institution of Civil Engineers was founded in London, and......

Words: 589 - Pages: 3

Engineering

... ENGINEERING ETHICS Concepts and Cases This page intentionally left blank F O U R T H ENGINEERING ETHICS Concepts and Cases g E D I T I O N CHARLES E. HARRIS Texas A&M University MICHAEL S. PRITCHARD Western Michigan University MICHAEL J. RABINS Texas A&M University Australia • Brazil • Japan • Korea • Mexico • Singapore • Spain • United Kingdom • United States Engineering Ethics: Concepts and Cases, Fourth Edition Charles E. Harris, Michael S. Pritchard, and Michael J. Rabins Acquisitions Editor: Worth Hawes Assistant Editor: Sarah Perkins Editorial Assistant: Daniel Vivacqua Technology Project Manager: Diane Akerman Marketing Manager: Christina Shea Marketing Assistant: Mary Anne Payumo Marketing Communications Manager: Tami Strang Project Manager, Editorial Production: Matt Ballantyne Creative Director: Rob Hugel Art Director: Cate Barr Print Buyer: Paula Vang Permissions Editor: Mardell Glinski-Schultz Production Service: Aaron Downey, Matrix Productions Inc. Copy Editor: Dan Hays Cover Designer: RHDG/Tim Heraldo Cover Image: SuperStock/Henry Beeker Compositor: International Typesetting and Composition  c 2009, 2005 Wadsworth, Cengage Learning ALL RIGHTS RESERVED. No part of this work covered by the copyright herein may be reproduced, transmitted, stored, or used in any form or by any means graphic, electronic, or mechanical, including but not limited to photocopying, recording, scanning, digitizing, taping, Web distribution...

Words: 48169 - Pages: 193

Inicio de Dropbox

...Dropbox - Inicio rápido ¿Qué es Dropbox? Dropbox es un software que enlaza a todas tus computadoras mediante de una sola carpeta. Es la manera más fácil de respaldar y sincronizar archivos entre computadoras. • La aplicación Dropbox para escritorio es un software que observa a una carpeta en tu computadora de escritorio y sincroniza cualquier modificación que ocurra en ella con la web y con otras computadoras. El sitio web de Dropbox te permite acceder a tus archivos en cualquier computadora con un navegador web. Puedes también utilizar el sitio web de Dropbox para compartir tus archivos o carpetas con otras personas. El sitio web de Dropbox para móviles y las apps de Dropbox te permiten conectarte a tu Dropbox desde tu bolsillo, y así poder llevarte tus archivos adondequiera que vayas. • • ¿Es para mí? La transferencia de datos entre computadoras por lo general requiere subir datos mediante formularios web, conectándose a unidades de red, teniendo a mano memorias USB, y enviándote a tí mismo y a otros adjuntos por correo electrónico. Con Dropbox todos estos métodos se vuelven obsoletos. Si estás buscando una mejor manera de transferir datos por Internet o si sólo buscas una manera de aumentar la productividad de tu equipo de trabajo, Dropbox es para ti. Añadir archivos a tu Dropbox Has encontrado tu carpeta de Dropbox, y ya deseas comenzar a utilizarla. Movamos un archivo a tu carpeta de Dropbox. Paso 1 Arrastra y suelta un archivo en tu Dropbox. Paso 2...

Words: 1131 - Pages: 5

Engineering

...2014. GATE 2014 score will be valid for a period of TWO YEARS from the date result announcement. What is New in GATE 2014 ? All the papers will be conducted online. On Line Exam Pattern: A computer based test (CBT) where the candidate have to enter the correct answers using computer mouse & virtual keypad displayed on the monitor. Numerical Data Type Questions : 15 to 35 marks. No Negative Marking for Numerical Data Type Questions. Exam Pattern: 3 hours, 65 questions, 100 marks. l Eligibility Bachelor’s degree holders in Engineering/ Technology/ Architecture. Master’s degree holders in any branch of Science/ l Mathematics/ Statistics/ Computer Applications or equivalent and those who are in the final year of such programs. Candidates in the second or higher year of Four-year l Integrated Master’s degree programs in Engineering /Technology. Candidates in the fourth or higher year of Five-year l Integrated Master’s or Dual Degree programs in Engineering/Technology. Candidates with qualifications obtained through l examinations recognized by UPSC/AICTE (e.g. AMIE by IE(I), AMICE(I) by the Institute of Civil Engineers (India)ICE(I)) as equivalent to B.E./B.Tech. Important Dates Commencement of Online Applicant Interface Last date for Submission of Online Application Receipt hard copy of application with supporting documents at GATE offices GATE 2014 Exam (Saturdays & Sundays) exact date will be updates on GATE website soon 2 Sep 2013 3 Oct 2013 10 Oct 2013 1 Feb 2014 to......

Words: 388 - Pages: 2

Engineering

...Topic Tar sands oil spill in arkansas Name Nadya Sanjaya SID 1412251 DELETE THIS PAGE WHEN YOU HAND IN THE EXAM Objective: This take home exam is designed to test your understanding and interpretation of engineering ethics principles and social science issues as related to contemporary engineering problems. Procedure: Select a current engineering topic that is not the Dreamliner. Follow the questions on the subsequent pages. Writing format: Times new roman font, 12 pt. Single-spaced with justified margins. Just like on this page here. One space in between each paragraph. Email the final copy to r.angelo.borrelli@gmail.com. Points will be deducted for incorrect format. Citations: Please cite all sources you use. In the text of the paper, please use a superscript when you make a citation, like this.1 Then, in the REFERENCES section, list your sources in order. Length: ‘Sufficient.’ I am not going to give a set page limit. Be concise but show depth. Writing style: You will be writing in some form, whether technical writing or essays, and then when you get jobs in the real world. There is no time to start practicing like now. Grammar and spelling are part of the grade! Proof-read your paper several times! 1. Introduction [10] Please introduce your topic and explain why it is important to you. The topic I’m writing is about the tar sands oil spill in Mayflower, Arkansas. ExxonMobil, the company that runs the pipeline was in charge of......

Words: 3532 - Pages: 15

Engineering

...Technology Group Practical Engineering Guidelines for Processing Plant Solutions Rev: 01 July 2011 www.klmtechgroup.com Author: KLM Technology Group #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia Viska Mulyandasari COOLING TOWER SELECTION AND SIZING (ENGINEERING DESIGN GUIDELINE) Checked by: Karl Kolmetz TABLE OF CONTENT INTRODUCTION Scope Cooling Tower GENERAL DESIGN CONSIDERATION Components of a Cooling Tower Tower materials Cooling Tower Design Consideration Operation Considerations Improving Energy Efficiency of Cooling Towers Tower Problems DEFINITIONS NOMENCLATURE 13 17 18 18 18 20 23 32 4 5 These design guideline are believed to be as accurate as possible, but are very general and not for specific design cases. They were designed for engineers to do preliminary designs and process specification sheets. The final design must always be guaranteed for the service selected by the manufacturing vendor, but these guidelines will greatly reduce the amount of up front engineering hours that are required to develop the final design. The guidelines are a training tool for young engineers or a resource for engineers with experience. This document is entrusted to the recipient personally, but the copyright remains with us. It must not be copied, reproduced or in any way communicated or made accessible to third parties without our written consent. KLM Technology Group Practical Engineering Guidelines for......

Words: 12674 - Pages: 51

Engineering

...Construction Engineering This civil engineering branch deals with the planning, construction and maintenance of structures. Construction engineering is the planning and execution of designs from site development, environmental, structural, transportation and structural engineers. They must ensure that the plans that have been designed by other engineers are implemented to their exact specifications. Construction engineers will supervise field work during the entire project. They are in a sense a cross between an engineer and manager as they will oversee the project from start to finish and handle any problems that come up throughout the duration of the project. Structural Engineering This branch of civil engineering encompasses the structural analysis and design of structures. It is the responsibility of the structural engineer to analyze and design a structure that will safely bear or resist the stresses, forces and loads. The design must satisfy the project specifications while meeting all safety regulations. The structure must endure massive loads as well as natural disasters and climate changes. Geotechnical Engineering In geotechnical engineering the engineer studies soil, foundations and bearing capacities. The engineer will study the behavior of the earth materials and how they will affect a structure that is to be constructed. They will also evaluate pre-existing structures that are showing signs of problems with the earth materials under or near the......

Words: 798 - Pages: 4

Engineering

...abrasives belong to the fine ceramics category. The category of coarse ceramics includes, for example, brick or conventional refractory materials. It also refers to  refers to ceramic products for engineering applications. High-performance ceramic is defined in DIN V ENV 12 212 as a "highly-developed, high-strength ceramic material, which is primarily non-metallic and inorganic and possesses specific functional attributes." The concept high-performance ceramics is primarily used to distinguish them from traditional ceramics based on clay, including tableware, sanitary ware, walls and floor tiles as well as ceramics for civil engineering. This definition agrees with that of the "Japanese Fine Ceramics Association". Structural or construction ceramics are terms that have not yet been standardised, referring to materials that in some way must withstand mechanical stresses, bending or pressure for example. Functional ceramics are high-performance ceramics in which the inherent characteristics of the material play an active role, for example ceramic parts which possess specific electric, magnetic, dielectric or optical properties. Electrical ceramics are high-performance ceramics that are applied because of their specific electric or electronic characteristics. Electrical engineering applications make use primarily of the excellent insulating characteristics and mechanical strength. The electronics industry also takes advantage of characteristics such as ferroelectric......

Words: 2812 - Pages: 12

Elio Case

...CPET 575 Management of Technology Technological Innovation Case I-1 Elio Engineering, Inc Lecture Note & Summary by Professor Paul I-Hai Lin Pages 13-31 of Text Book: Robert A. Burgelman, Clayton M. Christensen, and Steven C. Wheelwright, Strategic Management of Technology and Innovation, 5th edition, McGrawHill, 2009. Case I-1 Elio Engineering Inc. 1 Outline       Origin of Elio Engineering Seat Mechanism Technologies Industry and Regulatory Environment Technological Barriers and Risks Capabilities Requirements for Players in Automotive Seats and Comparative Company Profiles Decision Time Case I-1 Elio Engineering Inc. 2 1 Origin of Elio Engineering Paul Elio  Hari Saknkara   Technical Capabilities • JCI Benchmarking Department • JCI Structural Design and Analysis Department 1996 -1998 • A patent: revolutionary bike design • Failed venture   Technical Capabilities: 1988 – 1997, JCI’s Structural Design & Analysis Department MBA training 1998 Summer Intern at Booz Allen Hamilton, a management consulting firm  Feb. 1998 • A new seat design “No Compromise”  Feb. 1999 Case I-1 Elio Engineering Inc. 3 Origin of Elio Engineering 1998  First venture meeting: Paul & Hari, at Venice, CA  Agenda • ABTS (All-Belts-To-Seat) • Announcement & comments  A cost effective new seat design - a special class of ABTS Utilizing new technology Resulting structure: Low cost, Light weight, Strong • Features ...

Words: 3130 - Pages: 13

Engineering

...in engineering, ethical issues occur almost all the time. these issues include obstacles that may or may not be intentional. as engineers we need the mathematics and sciences we take the time to learn, then we use the materials to solve these problems effectively and accurately to make life easier. i couldn't imagine how difficult it would be to build a real tower considering how difficult it was making a wooden one. during the process of building this tower, i had to design and draw to exact measurement a tower that i believed would be strong enough to withstand more weight than the rest of the towers created by my classmates. that was the easy part. i then had to cut the pieces of wood i would need for each wall to the exact size then frame it and glue it all together four times until they dried, using my geometry skills to make forty-five and ninety degree angle cuts. After the waiting process was over i then created another part of the tower called the beams which is basically extra support for the tower. I used a basic double V design to allow maximum strength for the tower and i did this nine times, three for each floor. I then had to pin the entire tower together, slide the beams in, glue the beams while they were in the tower, and place triangular floors while it was still drying. so after all the hard work was done, i simply finished gluing all the walls together and then i added a coating of super glue to the tower and i was finished. Using a software......

Words: 438 - Pages: 2

Engineering

...ENB100 - ENGINEERING & SUSTAINABILITY Progress Report (due in Wk12 Tutorial) ! Student Name: ! Student # Your task: Your role as a professional engineer will require you to assess multiple solutions for a single problem. Often, the suitability of the solution has little to do with the price or the provider but more to do with ‘fitness for purpose’. As such, it is vital that a structured process is used to identify the most appropriate solution. This process is called an evaluation matrix. ! Your task is two-fold. Firstly, in your own words, you need to define the term ‘evaluation matrix’. Make sure your definition relates to the engineering context and provide robust references. Secondly, you need to develop suitable criteria for use in your final project. Ensure you use clear and measurable criteria that take into account the client needs. ! ! ! 1. Definition An Evaluation matrices are used in the engineering profession as a tool to evaluate a number of different types of options against a prioritised criteria. If the design ideas do not meet the criteria then two different levels of the evaluation matrices can be used. The first level effectively acts as a filter with each different option evaluating it against the mandatory criteria. (UCLA, 1-2, 2014) para The design options that meed these mandatory criteria then go on to the second level with involves them being evaluated against prioritised criteria. This is vital this......

Words: 438 - Pages: 2

Engineering

...Task 1 Why does engineering equipment fail, what happens when it does and what can we do about it? Equipment’s fails because certain parts of it fail first and that prevents the whole process from working. It is important to understand the problem before any maintenance. There are a lot of reasons it could fail because of the age of the equipment and parts need to be changed or if the equipment vibrates nuts and bolts can be loosen and parts can fall apart. When this happens the machine needs to be stopped and maintained. Age is very important if the machine has been used for a very long time the efficiency and the quality wouldn’t be as good as a new one, a machine has a certain life span for example on a car the timing belt must be replaced after every 50,000 miles. Wear could lead to a fault in a machine because parts come into contact with each other for example a cars break pad. Corrosion in certain materials takes longer than others like aluminium, when a part of a machine corrodes it degrade and can cause failures. Raw materials such as oil and compressed air can run equipment’s. If something different unwanted to the equipment is in it, it can affect the way the machine works. For example water in a petrol tank will cause a car to break down and this is a fouling. Lack of maintenance can cause a fail, routine maintenance such as cleaning and lubrication. This cause for example in a factory that is manufacturing can will stop the line and check the cars in that line......

Words: 1288 - Pages: 6

Engineering

...KOMBS ENGINEERING Pada Juni 1993, Kombs Teknik telah berkembang menjadi sebuah perusahaan dengan $ 25 juta penjualan. Dasar bisnis terdiri dari dua kontrak dengan Departemen Energi AS (DOE), satu untuk $ 15 juta dan satu untuk $ 8 juta. Sisa $ 2.000.000 terdiri dari berbagai kecil johsfor 15.000 Dolar untuk $ 0.000 DOLLAR setiap. Kontrak besar dengan DOE adalah kontrak lima tahun sebesar $ 15 juta per tahun. Kontrak ini diberikan pada tahun 1988 dan naik untuk pembaruan pada tahun 1993. DOE telah membuat jelas bahwa, meskipun mereka sangat senang dengan kinerja teknis Kombs, kontrak tindak-on harus melalui penawaran kompetitif oleh hukum. Pemasaran intelijen menunjukkan bahwa DOE dimaksudkan untuk menghabiskan $ 10 juta per tahun selama lima tahun pada tindak pada kontrak dengan tanggal penghargaan tentatif Oktober 1993. Pada tanggal 21 Juni 1993, permohonan proposal diterima di Kombs. Persyaratan teknis permintaan usulan tidak dianggap sebagai prob¬lem untuk Kombs. Tidak ada pertanyaan dalam pikiran siapa pun yang pada merit teknis saja, Kombs akan memenangkan kontrak. Masalah yang lebih serius adalah bahwa DOE diperlukan bagian terpisah dalam proposal tentang bagaimana Kombs akan mengelola proyek $ 10.000.000 / tahun serta keterangan lengkap tentang bagaimana sistem manajemen proyek di Kombs difungsikan. Ketika Kombs ^ memenangkan tender asli pada tahun 1988, tidak ada persyaratan manajemen proyek. Semua proyek di Kombs yang dicapai melalui struktur organisasi......

Words: 324 - Pages: 2

Engineering

...• Why are you pursuing a degree in Engineering, Architecture, or Technology? As a child, I grew up playing with tools in my dad’s garage. Instead of puzzles, I put together ball bearings. I chose mechanical engineering because I’m a very visual and kinesthetic learner. I like creating things that I can see and hold in my hands. I have always been most interested in math and science, and engineering is a field in which you can apply your knowledge to real life situations. I love problem solving, and the feeling of accomplishment when I manage to find a solution. • Why do you want to be involved in CEAT Student Council? I do not believe in joining organizations or clubs just for the extra line on a resume. I would prefer to devote my time to one cause that matters to me. I believe CEAT Student Council contributes greatly to our environment on campus. In CEAT Student Council, I would have the opportunity to give back to the community, volunteer, and organize some great events for our campus; all with motivated people that share many of my interests. • What is your greatest strength and how could you use it to benefit CEAT Student Council? I am an extremely organized and efficient person. I am very good at time management, and I never overextend myself. I would have the time needed to devote to CEAT Student Council meetings, activities, and events. I would be an asset for organizing events that would provide our student body with new opportunities as......

Words: 531 - Pages: 3

Elio Ingenieroa

...Sonora Norte Ingeniería Industrial y de Sistemas Sistemas de Innovación Tecnológica IN3040 AC 103 – Caso I- 1 Elio Engineering, Inc. Profesor: Leoncio Montiel R Equipo: “Los Precisos” José de Jesús Soto Ramírez A00958529 Francisco Arriquivez A00958496 Lunes 01 de febrero de 2016 AC 103 – Caso I-1 Elio Engineering, Inc. Antecedentes: En esta sección expliquen los antecedentes del caso. Paul Elio es una persona con experiencia en el diseño e innovación de nuevos productos. El fundó la empresa “Elio Engineering, Inc.” Junto con Hari Sankara, la cual es una compañía que diseñó una nueva tecnología de asientos para automóviles que forma parte de los asientos tipo ABTS (All-Belt-To-seat) y este nuevo diseño se llama NC (No Compromise). Para poder ser proveedor de las grandes compañías automotrices, primero deben de pasar todas las pruebas de seguridad y calidad por parte del gobierno y otras asociaciones. Es por esto que en Noviembre de 1998 Paul y Hari se reúnen en pláticas con Bostrom Seating para realizar el prototipo y probar su asiento debido a que no contaban con los recursos suficientes. Desarrollo: En esta sección explicarán los principales hechos del caso y que son relevantes para la problemática que se presenta. Como se mencionó anteriormente Paul Elio y Hari Sankara fundaron la compañía de Elio Engineering basados principalmente en el diseño de los asientos. ¿Qué quiere decir esto? Los asientos NC seat (parte de ABTS) tienen algo......

Words: 556 - Pages: 3

EUR 9,99 | Chefs Table (12) | Tokyo hot k1081 Mayumi Shibata JAV UNCENSORED